[Model Supported] DG811,DG821,DG831,DG812,DG822,DG832,DG952,DG972,DG992,DG2052,DG2072,DG2102 [Latest Revision Date] 2021-05-14 [Updated Contents] v00.02.06.00.01 2021-05-14 - Optimize UI interaction - The key functions of home and menu are exchanged - The positions of DC and ARB in fundamental wave are exchanged - Fixed the invalid trigger command of sour1: burs: trig when both channels are on - Modify advance > sine wave, another channel has no wave table - Abnormal duty cycle calculation caused by multiple frequency change - Fixed the failure of channel copy and external modulation for the first time - Solve the problem that the file menu is invalid because the boot interface is imported into the storage interface - Calculation of modified carrier amplitude - The English prompt message of ignoring the same phase has been modified - Change the four icons at the bottom to three, enlarge the icon and add the shortcut icon. - Solve the problem that remote command cannot be triggered when sweep trigger source is manual trigger - The function of importing waveform in ARB mode is added v00.02.05.00.00 2020-05-30 - Solve the problem that the machine model changes to DG811 when upgrading to 00.02.04.00.00 v00.02.04.00.00 2020-02-18 - To prevent open source complaints, change the following: - Replace kernel and uboot with open source declaration - An open source statement has been added to help v00.02.03.00.00 2019-12-31 - Solve the problem about the version after 01.09 (inclusive) is changed to upgrade 01.08 (inclusive), the device model serial number will be restored to the default value - Solve the problem of address configuration of ultralab heartbeat server - After setting the offset, the problem of the output instantaneous voltage error of the relay is solved - Qt library is added to the file system to change the Qt library used by the application from static to dynamic v00.02.02.00.00 2019-10-28 - Modify the logic bug that when the pulse frequency is 1K and the edge is 100US, the edge automatically becomes 8NS - Modify the dual channel output sin waveform, frequency coupling is turned on, and the same phase is used once. After modifying the frequency, the output waveform phase is not synchronized - Modify the logic bug of pulse in burst mode, pulse waveform frequency 10K, burst configuration 2 cycles, the first point of idle level, rising edge overshoot exceeding 10% of the index - When the pulse frequency is changed from 50KHz to 200kHz, there will be a logic bug of edge overshoot for a period of time v00.02.01.00.00 2019-7-30 - The first sardine II official version - Compatible with dg800 / 900 software - DG2000 add LXI webpage, modify keyboard key function