[Supported Model] All the MSO/DS7000 Series Digital Oscilloscopes [Latest Revision Date] 2021/12/03 [Updated Contents] -------------------- v00.01.02.01.03 2021/12/03 - Added average operation in math function - Added CAN-FD protocol decoding (DS7000-AUTO option) - Added SCPI instruction to switch the manual cursor measurement area - Added SCPI instruction to set the contents of the analog channel label - Analog channel labels support resizing and add SCPI instructions - Supported dragging analog channel labels to change positions and adding SCPI instructions - Added SCPI instruction to switch the measurement threshold setting mode - Delay and phase measurement supported edge event setting, edge support first, last or automatic, and added SCPI instruction - Supported changing the cursor position by inputting time or voltage - The storage depth can be modified in the stop state - Updated touch screen driver - Optimizing DC calibration algorithm in self calibration - When zoom is on, the cursor function will measure the extended time base by default - Fixed the problem that the probe ratio parameter is invalid for the search function threshold setting - Optimized the waveform of XY mode - Supported turning off the display of the source channel of the math waveform - Modified the identification instability of RP7000 series probe - Improved WebControl web page refresh speed (related to network speed) - Optimized WebControl web page control, supports dragging and drawing rectangles with the mouse - Supported modifying labels and file names through the physical keyboard - Optimized bandwidth frequency response @1MΩ input impedance - Supported the connection communication of T2R1000 probe adapter - Optimized the digital filtering function in math function - Modified the problem that the network printer cannot print v00.01.02.00.06 2020/06/18 - In the calibration part, fine delay calibration between channels is added v00.01.02.00.05 2020/02/25 - Optimized the connection HDMI start problem optimized the connection HDMI start problem - Optimize the vertical gear, channel zero elimination error - Optimization of the inconsistency between SPI CLK and SDA names - Zoom mode square wave display in optimized 2S time base - Added command to get pass / fail times - Delete the default email account and password - Problems in remote instructions are optimized - Optimized 1K storage depth, waveform recording - The problem of too many stuck events in optimized decoding v00.01.01.09.02 2019/07/23 - Reduced the waveform noise floor - Optimized the waveform jitter caused by noise floor - Optimized the system response under the deep memory condition - Optimized the system response during the timebase adjustment process - Optimized the auto configuration condition for FFT waveform - Optimized the display effect during image saving - Modified the occasional problem of not displaying the measurement results - Optimized the user experience in cursor range adjustment in Measure setting - Modified relevant problems concerning SPI decoding - Modified address setting problems in I2C trigger - Added to save GPIB address setting during power-on storage - Modified the trigger sensitivity configuration. See Datasheet for details - Optimized the start-up time for the oscilloscope, shortening it to about 1 minute - Added a command :MEASure:STATistic:ITEM? CNT,[,[,]] - Supported exporting the waveform memory data of several analog channels simultaneously - Added high resolution mode - Supported mouse operation for cursor - Bandwidth upgrade option supported gradual upgrade - Added the 500 uV/div vertical scale v00.01.01.07.01 2018/07/10 - Auto supports unlocking by passwords - Math and Decode support displaying status and type - Add HELP menu item in "Utility->System" - Add probe ratios: 10000X,20000X,50000X - Fixed the problem of wave frozen - Fixed the exception of Fast acquisition - Fixed the setup saving and loading - Fixed the wave exporting and importing - Fixed the problem of Measure - Fixed the problem of Option uninstalling v00.01.01.05.09 2018/05/03 - Release the production version