[Supported Model]    All the MSO5000 Series Digital Oscilloscopes 
[Latest Revision Date]  2021/10/18

[Updated Contents]
--------------------

v00.01.03.00.03 2021/10/18

      - Optimized waveform display in XY mode.
      - Optimized the DC gain calibration algorithm.
      - The La channel is decoded in parallel, which solved the problem of decoding
         error in negative polarity.

v00.01.03.00.01 2020/03/27

      - Solved the error of recording function when the time base is 10ns/div.
      - Optimized the auto function after adjusted the offset cal of analog channel.
      - Supported dragging the math waveform by dragging the icon of the math.

v00.01.02.00.03 2020/02/27

      - Solved the error of reading LA channel memory data by SCPI commonds. 

v00.01.02.00.02 2020/02/25

      - Solved the problem of starting the oscilloscope under HDMI connection.
      - Solved the error of channel offset cal function when adjusting the vertical scale.
      - Unified the naming of CLK and SDA in SPI protocol analysis.
      - Optimized the display of waves under zoom mode of 2s/div time base. 
      - Added command to get pass / fail times.
      - Deleted the default email account and password.
      - Optimized some problems in SCPI commonds.
      - Optimized the problem of software crash when there are too many decoding events.

v00.01.01.04.08 2019/08/02

      - Fixed system crashed when clicking Default.
      - Fixed 4CH option bug.
      - Fixed noise signal captured.
      - Improved the measure result updating rate.
      - Fixed accurate measurements not updated in ROLL 

v00.01.01.04.04  2019/02/20

     - Optimized the operating experience of the local upgrade.
     
     - Added the 12-bit high resolution mode.
     - Added 500uV/div in vertical scale. 
     - Added the SCPI command :MEASure:STATistic:ITEM CNT,<item>[,<src>[,<src>]] 
       to reading the count of measure statistics.
     - The waveform can zoom out by drawing a rectangle. If you draw a rectangle
       from the top left to the bottom right, the waveform will zoom in. If you
       draw it from the bottom right to the top left(the opposite direction), 
       the waveform will zoom out.
     - Added the GND coupling in channel.
     - Enriched the color options of the LA channels.
     - If the newest version is detected, a red dot will display in the Online 
       upgrade menu.
       
     - Modified the waveform freeze problem in slow scan mode.
     - The boot time is reduced to less than 1 minute.
     - Improve the touch experience in the lower half of the touch screen.
     - Reduced the noise amplitude of the waveform. 
     - Modified the problem of decode vanishing after moving signals.
     - Modified the error of digital waveform when adjusting the timebase after 
       stop the sampling.
     - The :SYSTEM:SETUP command can successfully save and upload setting 
       information in remote.


v00.01.01.02.03  2018/10/15

     - Release the production version